We use cookies to ensure that we provide you with the best experience on our site. To learn more about how they are used please view our Cookie Policy.
If you continue to browse our website we will assume that you are happy to receive cookies. However, click here if you would like to change your cookie settings. [X]

Equipment for Hire

Atlas Copco Tex 05PE chipping hammer

Atlas Copco’s HAPS (Hand and Arm Protection System) helps reduce the operator’s exposure to vibration. The Tex 05PE has unrivalled HAV (Hand Arm Vibration) reduction as measured in three axes tests and combines outstanding performance, safety and the reliability expected from Atlas Copco.
 
The Tex 05PE vibro-reduced chipping hammer is developed for smaller jobs in softer materials. Featuring a new vibro-reduced housing, vibrations are damped throughout the whole hammer body. Compared to standard hammers, the operator experiences less vibration in both hands when using any of the different gripping surfaces of the machine.

More Info
Atlas Copco Tex 05PE chipping hammer
Specifications:
Impact frequency (blows/min) 2640
Operating weight 6.3kg
Vibration level 3 axes (ISO28927-10) 2.4m/s2

Atlas Copco Tex 07PE heavy chipping hammer

The Tex 07PE is a heavy chipping hammer and is for heavier duty applications in harder materials.

Atlas Copco’s HAPS (Hand and Arm Protection System) helps reduce the operator’s exposure to vibration. Featuring a new vibro-reduced housing, vibrations are damped throughout the whole hammer body. Compared to standard hammers, the operator experiences less vibration in both hands when using any of the different gripping surfaces of the machine.

More Info
Atlas Copco Tex 07PE heavy chipping hammer
Specifications:
Impact frequency (blows/min) 1770
Operating weight 8.5kg
Vibration level 3 axes (ISO28927-10) 12.4m/s2

Atlas Copco Tex 09PE demolition pick

Atlas Copco’s HAPS (Hand and Arm Protection System) helps reduce the operator’s exposure to vibration. The Tex 09PE has unrivalled HAV (Hand Arm Vibration) reduction as measured in three axes tests and combines outstanding performance, safety and the reliability expected from Atlas Copco.

The Tex 09PE is a medium-weight pick hammer designed for medium to heavy applications in brick, concrete or other hard materials. Featuring a new vibro-reduced housing, vibrations are damped throughout the whole hammer body. Compared to standard hammers, the operator experiences less vibration in both hands when using any of the different gripping surfaces of the machine.

More Info
Atlas Copco Tex 09PE demolition pick
Specifications:
Impact frequency (blows/min) 1800
Operating weight 10.5kg
Vibration level 3 axes (ISO28927-10) 4.2m/s2

Atlas Copco Tex 12PE heavy pick

Atlas Copco’s HAPS (Hand and Arm Protection System) helps reduce the operator’s exposure to vibration.

The Tex 12PE is a heavy pick and is the next size up from the Tex 09PE. It has the same vibration damping design characteristics as the Tex 09PE and is for use on the most demanding materials.

More Info
Atlas Copco Tex 12PE heavy pick
Specifications:
Impact frequency (blows/min) 1620
Operating weight 12kg
Vibration level 3 axes (ISO28927-10) 4m/s2

Atlas Copco Tex 230PE hand held pneumatic breaker

Atlas Copco’s HAPS (Hand and Arm Protection System) helps reduce the operator’s exposure to vibration.

A highly efficient silencing and vibration damping system makes the Tex 230PE comfortable to operate and a productive choice for demanding jobs. Built-in ergonomic features make it comfortable and safe to use over prolonged periods.

More Info
Atlas Copco Tex 230PE hand held pneumatic breaker
Specifications:
Impact frequency (blows/min) 1320
Operating weight 27.5kg
Vibration level 3 axes (ISO28927-10) 4.2m/s2

Atlas Copco Cobra Pro

Atlas Copco’s HAPS (Hand and Arm Protection System) helps reduce the operator’s exposure to vibration.

Hitting at an incredible 60 joules, the Cobra Pro offers the same power-to-weight ratio as many pneumatic or hydraulic breakers. With no compressors, hoses or cables to set up, it’s ideal for smaller jobs that are quickly completed and an extensive range of tools means it can be used for everything from cutting and breaking, to driving and compacting.

More Info
Atlas Copco Cobra Pro
Specifications:
Impact frequency (blows/min) 1440
Operating weight 25.2kg
Vibration level 3 axes (ISO28927-10) 4.3m/s2

Atlas Copco hydraulic power pack (LP9-20)

Atlas Copco’s HAPS (Hand and Arm Protection System) helps reduce the operator’s exposure to vibration.

Offering excellent power-to-weight ratio, the LP9-20 is light, portable and hard hitting. Fitted with wheels and handles, it is easily manoeuvrable around building sites.

More Info
Atlas Copco hydraulic power pack (LP9-20)
Specifications:
Impact frequency (blows/min) 1450
Weight without breaker 74kg
Breaker weight 27.5kg
Vibration level 3 axes (ISO28927-10) 4.6m/s2

Atlas Copco XAS 37 Kd Hard Hat single tool compressor

Powered by Honda, Kubota or Deutz diesel engines, Atlas Copco’s Series 7 portable compressors are compact, efficient, economical and easy to operate. They give you a reliable source of compressed air to drive your pneumatic tools, as well as your high free air delivery applications such as sandblasting. For certain models an optional integrated 6.5 or 12 kVA generator provides additional power for welding, lighting, heating, site instruments and power tools. All Series 7 models comply with current regulations concerning safety, exhaust emissions and noise.

Customer benefits
• Ease of operation – All controls are located on a single panel for quick access and smooth operation.
• Long-lasting – Body parts are made of powder-coated Zincor™ steel for excellent corrosion resistance. The canopy can also be supplied in highly impact-resistant HardHat™ polyethylene.
• High efficiency – The combination of an efficient Honda, Kubota or Deutz engine and the high performance Atlas Copco compressor element guarantees outstanding efficiency and reduced wear.
• Low operational cost, high fuel autonomy – All models are fitted with a stepless, fully automatic regulator. This constantly varies the engine speed according to air demand, reducing fuel consumption. The high capacity fuel tank allows the Series 7 to work a full shift without the need to refuel.
• Easy to service – You can remove the side panels, front and rear baffle in seconds, while self-supporting gas struts lift the hood in one piece. The result is fast service access to accelerate maintenance and reduce downtime.
• Low cost of ownership – The tough, impact-resistant HardHat™ canopy resists damage and corrosion, eliminating the time and cost of repair and repaint jobs.

More Info
Atlas Copco XAS 37 Kd Hard Hat single tool compressor
Specifications:
Normal effective working pressure OP 102psi
Air flow (FAD) 70cfm
Engine Kubota

Atlas Copco XAS 47 Kd Hard Hat compressor

Powered by Honda, Kubota or Deutz diesel engines, Atlas Copco’s Series 7 portable compressors are compact, efficient, economical and easy to operate. They give you a reliable source of compressed air to drive your pneumatic tools, as well as your high free air delivery applications such as sandblasting. For certain models an optional integrated 6.5 or 12 kVA generator provides additional power for welding, lighting, heating, site instruments and power tools. All Series 7 models comply with current regulations concerning safety, exhaust emissions and noise. 

Customer benefits
• Ease of operation – All controls are located on a single panel for quick access and smooth operation.
• Long-lasting – Body parts are made of powder-coated Zincor™ steel for excellent corrosion resistance. The canopy can also be supplied in highly impact-resistant HardHat™ polyethylene.
• High efficiency – The combination of an efficient Honda, Kubota or Deutz engine and the high performance Atlas Copco compressor element guarantees outstanding efficiency and reduced wear.
• Low operational cost, high fuel autonomy – All models are fitted with a stepless, fully automatic regulator. This constantly varies the engine speed according to air demand, reducing fuel consumption. The high capacity fuel tank allows the Series 7 to work a full shift without the need to refuel.
• Easy to service – You can remove the side panels, front and rear baffle in seconds, while self-supporting gas struts lift the hood in one piece. The result is fast service access to accelerate maintenance and reduce downtime.
• Low cost of ownership – The tough, impact-resistant HardHat™ canopy resists damage and corrosion, eliminating the time and cost of repair and repaint jobs.

More Info
Atlas Copco XAS 47 Kd Hard Hat compressor
Specifications:
Normal effective working pressure OP 102psi
Air flow (FAD) 89cfm
Engine Kubota

Atlas Copco XAS 67 Kd Hard Hat compressor

Powered by Honda, Kubota or Deutz diesel engines, Atlas Copco’s Series 7 portable compressors are compact, efficient, economical and easy to operate. They give you a reliable source of compressed air to drive your pneumatic tools, as well as your high free air delivery applications such as sandblasting. For certain models an optional integrated 6.5 or 12 kVA generator provides additional power for welding, lighting, heating, site instruments and power tools. All Series 7 models comply with current regulations concerning safety, exhaust emissions and noise.

Note: adjustable towing arm as shown in image in optional extra.

Customer benefits
• Ease of operation – All controls are located on a single panel for quick access and smooth operation.
• Long-lasting – Body parts are made of powder-coated Zincor™ steel for excellent corrosion resistance. The canopy can also be supplied in highly impact-resistant HardHat™ polyethylene.
• High efficiency – The combination of an efficient Honda, Kubota or Deutz engine and the high performance Atlas Copco compressor element guarantees outstanding efficiency and reduced wear.
• Low operational cost, high fuel autonomy – All models are fitted with a stepless, fully automatic regulator. This constantly varies the engine speed according to air demand, reducing fuel consumption. The high capacity fuel tank allows the Series 7 to work a full shift without the need to refuel.
• Easy to service – You can remove the side panels, front and rear baffle in seconds, while self-supporting gas struts lift the hood in one piece. The result is fast service access to accelerate maintenance and reduce downtime.
• Low cost of ownership – The tough, impact-resistant HardHat™ canopy resists damage and corrosion, eliminating the time and cost of repair and repaint jobs.

More Info
Atlas Copco XAS 67 Kd Hard Hat compressor
Specifications:
Normal effective working pressure OP 102psi
Air flow (FAD) 127cfm
Engine Deutz

Atlas Copco XAS 67 Ddg compressor/generator

Powered by Honda, Kubota or Deutz diesel engines, Atlas Copco’s Series 7 portable compressors are compact, efficient, economical and easy to operate. They give you a reliable source of compressed air to drive your pneumatic tools, as well as your high free air delivery applications such as sandblasting. For certain models an optional integrated 6.5 or 12 kVA generator provides additional power for welding, lighting, heating, site instruments and power tools. All Series 7 models comply with current regulations concerning safety, exhaust emissions and noise.

Note: adjustable towing arm as shown in image in optional extra.

Customer benefits
• Ease of operation – All controls are located on a single panel for quick access and smooth operation.
• Long-lasting – Body parts are made of powder-coated Zincor™ steel for excellent corrosion resistance. The canopy can also be supplied in highly impact-resistant HardHat™ polyethylene.
• High efficiency – The combination of an efficient Honda, Kubota or Deutz engine and the high performance Atlas Copco compressor element guarantees outstanding efficiency and reduced wear.
• Low operational cost, high fuel autonomy – All models are fitted with a stepless, fully automatic regulator. This constantly varies the engine speed according to air demand, reducing fuel consumption. The high capacity fuel tank allows the Series 7 to work a full shift without the need to refuel.
• Easy to service – You can remove the side panels, front and rear baffle in seconds, while self-supporting gas struts lift the hood in one piece. The result is fast service access to accelerate maintenance and reduce downtime.
• Low cost of ownership – The tough, impact-resistant HardHat™ canopy resists damage and corrosion, eliminating the time and cost of repair and repaint jobs.

More Info
Atlas Copco XAS 67 Ddg compressor/generator
Specifications:
Normal effective working pressure OP 102psi
Air flow (FAD) 123cfm
Power 6.5kVa simultaneously
Engine Deutz

Atlas Copco XAS 137 Kd Four Tool compressor

Powered by Honda, Kubota or Deutz diesel engines, Atlas Copco’s Series 7 portable compressors are compact, efficient, economical and easy to operate. They give you a reliable source of compressed air to drive your pneumatic tools, as well as your high free air delivery applications such as sandblasting. For certain models an optional integrated 6.5 or 12 kVA generator provides additional power for welding, lighting, heating, site instruments and power tools. All Series 7 models comply with current regulations concerning safety, exhaust emissions and noise.

Note: adjustable towing arm as shown in image in optional extra.

Customer benefits
• Ease of operation – All controls are located on a single panel for quick access and smooth operation.
• Long-lasting – Body parts are made of powder-coated Zincor™ steel for excellent corrosion resistance. The canopy can also be supplied in highly impact-resistant HardHat™ polyethylene.
• High efficiency – The combination of an efficient Honda, Kubota or Deutz engine and the high performance Atlas Copco compressor element guarantees outstanding efficiency and reduced wear.
• Low operational cost, high fuel autonomy – All models are fitted with a stepless, fully automatic regulator. This constantly varies the engine speed according to air demand, reducing fuel consumption. The high capacity fuel tank allows the Series 7 to work a full shift without the need to refuel.
• Easy to service – You can remove the side panels, front and rear baffle in seconds, while self-supporting gas struts lift the hood in one piece. The result is fast service access to accelerate maintenance and reduce downtime.
• Low cost of ownership – The tough, impact-resistant HardHat™ canopy resists damage and corrosion, eliminating the time and cost of repair and repaint jobs.

More Info
Atlas Copco XAS 137 Kd Four Tool compressor
Specifications:
Normal effective working pressure OP 102psi
Air flow (FAD) 267cfm
Engine Kubota

Service

Our team has the experience, the skills and the resources to keep your equipment up and running - whatever happens!

► Find out more

Credit Application

Apply for a credit account today. 

► Find out more

Locations

Our 7 depots employ nearly 150 people, including 55  
skilled service engineers.

► Find out more

Hire

We'll provide the right equipment, at the right time and at the right price, with outstanding service.

► Find out more

Locations

Our locations

Our 7 depots cover from Land’s End to Sheerness and from Beachy Head to The Welsh Valleys, employing 150 people, including nearly 55 skilled service engineers.

Find your nearest depot

Modern Day Slavery Statement

CBL statement pursuant to section 54(1) of the Modern Slavery Act 2015.

Find Out More

Health & Safety

CBL is committed to Health & Safety in all aspects of its work including a commitment to employees, customers, suppliers and members of the public.

Health & Safety

Finance Options

We work closely with a wide range of finance providers and are able to offer very competitive rates.

Find out more

Recruitment

We are always looking for the right candidates to join our successful team, so email us at recruitment@cbl.co.uk if you would like to be considered for future vacancies.

Find out more

Stakeholder Statement

Statement by the Directors in relation to Performance of their Statutory Duties in accordance with Section 172(1) Companies Act 2006.


Find out more