We use cookies to ensure that we provide you with the best experience on our site. To learn more about how they are used please view our Cookie Policy.
If you continue to browse our website we will assume that you are happy to receive cookies. However, click here if you would like to change your cookie settings. [X]

Equipment for Sale

All Merlo Telehandlers fully comply with EN15000 and the Machinery Directive.

    

More Info

Merlo P27.6 telehandler

Merlo has developed a new high-performance compact telehandler. Compactness, lifting capacity, traction, comfort and high-level safety are the special features of the new Merlo P27.6.

With a boom which extends to more than 6 metres in height for a lifted load of 2.7 tonnes, the new P27.6 has the same modular cab as its big brothers, offering astounding space and visibility - unique in its category.

With a top speed of 40 km/h (55kW model) and the option of being registered as an on-road agricultural tractor, the P27.6 handler is unrivalled in its class, and is the undisputed leader on the market.

Maximum speed 40 km/h (55kW model): unique in its class.
Type-approval as an on-road agricultural tractor (optional).
6 metre booms: superior to front loaders in height, speed and productivity.
Hydrostatic transmission with continuous variant from 0 to 40kph.
Two levels of torque and power.
Largest cab in its category: 1010 mm.
Maximum visibility in every direction.

 

 

More Info
Merlo P27.6 telehandler
Specifications:
Rated max load 2700kg
Max lift height 6.1m
Load capacity at max lift height 1750kg

Merlo P30.10 telehandler

Merlo has conceived a new high performance compact stabilised telehandler. Compactness, lifting capacity, traction, comfort and a high degree of safety are the special features of the new Merlo P30.10.

The Panoramic P30.10 has an exceptionally wide (1010mm) cab, Deutz 75HP engine and hydrostatic transmission and 40KPH maximum speed. Frame levelling and compact stabilisers maximise lift capacity by assuring a vertical lift and the Merlo axle features integral side shift.

With a boom capable of reaching 10 metres in height and 3 tons in lifting, the new P30.10 has the same modular cab as its older brothers with a space and glazed surface that is unequalled in its category.

With a maximum speed of 40 km/h and the possibility of lifting 3 tons to 10 metres in a stabilised configuration. A telescopic handler that has no equals on the market.
Maximum speed 40 km/h: reduced shifting times
The roomiest and widest cab in its category: 1010 mm
Maximum visibility in every direction
Compact dimensions: maximum width 2100mm
Highly manoeuvrable: reduced turning radius
High load-carrying capacity: maximum load at maximum height in a stabilised configuration

 

More Info
Merlo P30.10 telehandler
Specifications:
Rated max load 3000kg
Max lift height 9.6m
Load capacity at max lift height 3000kg

Merlo P33.9 telehandler

 

More Info
Merlo P33.9 telehandler
Specifications:
Rated max load 3300kg
Max lift height 8.6m
Load capacity at max lift height 1750kg

Merlo P35.7 telehandler

 

More Info
Merlo P35.7 telehandler
Specifications:
Rated max load 3500kg
Max lift height 6.7m
Load capacity at max lift height 3500kg

Merlo Panoramic P38.12 telehandler

The Panoramic P38.12 has an exceptionally wide (1010mm) cab, Kubota 75HP engine and hydrostatic transmission. Frame levelling and compact stabilisers maximise lift capacity by assuring a vertical lift and the Merlo axle features integral sideshift.

The range of Panoramic machines with stabilisers are very compact and manoeuvrable compared to machines with similar lift heights and capacities making them much more versatile on to-day’s modern sites with very limited space.

 

More Info
Merlo Panoramic P38.12 telehandler
Specifications:
Rated max load 3800kg
Max lift height 11.6m
Load capacity at max lift height 3500kg

Merlo Panoramic P38.13 telehandler

The Panoramic P38.13 has an exceptionally wide (1010mm) cab, Kubota 75HP engine and hydrostatic transmission. Frame levelling and compact stabilisers maximise lift capacity by assuring a vertical lift and the Merlo axle features integral sideshift.

The range of Panoramic machines with stabilisers are very compact and manoeuvrable compared to machines with similar lift heights and capacities making them much more versatile on to-day’s modern sites with very limited space.

 

More Info
Merlo Panoramic P38.13 telehandler
Specifications:
Rated max load 3800kg
Max lift height 12.6m
Load capacity at max lift height 3500kg

Merlo Panoramic P38.14 telehandler

The Panoramic P38.14 has an exceptionally wide (1010mm) cab, Kubota 75HP engine and hydrostatic transmission. Frame levelling and compact stabilisers maximise lift capacity by assuring a vertical lift and the Merlo axle features integral sideshift.

The range of Panoramic machines with stabilisers are very compact and manoeuvrable compared to machines with similar lift heights and capacities making them much more versatile on to-day’s modern sites with very limited space.

 

More Info
Merlo Panoramic P38.14 telehandler
Specifications:
Rated max load 3800kg
Max lift height 13.6m
Load capacity at max lift height 2500kg

Merlo Panoramic P40.17 telehandler

The Panoramic P40.17 has an exceptionally wide (1010mm) cab, Deutz 75HP turbo engine and 40 km/h hydrostatic transmission. Frame levelling and compact stabilisers maximise lift capacity by assuring a vertical lift and the Merlo axle features integral sideshift.
Lift Height 
The ultra high-lift Panoramic P40.17 utilises a four-section boom extended and retracted with a chain mechanism. This offers great speed and smoothness, whilst minimising the parasitic weight of the structure. This helps to provide the unique performance of this product within a compact, manoeuvrable frame. This boom style protects the main mechanism internally, so there is nothing to damage on site. 
Load-sensing Hydraulics 
The P40.17 uses a Load-sensing hydraulic system. A variable delivery axial piston pump automatically adjusts flow rate, according to the load demanded. The standard build uses a two-lever '2 in 1' joystick system. 
Both levers are directly linked to the main valve block - one controlling lift and fork tilt, the other extension and the boom head attachment service. A separate lever controls the side-shifting mechanism. Many drivers prefer the direct mechanical control for its simplicity and feedback. 

 

More Info
Merlo Panoramic P40.17 telehandler
Specifications:
Rated max load 4000kg
Max lift height 16.7m
Load capacity at max lift height 2500kg

Roto MCSS Continuous Slew telehandlers

The MCSS Continuous Slew Safety System gives the driver a graphical display of the machine functions and protects against overloading, whatever the position of the stabiliser legs.
The Roto is very much a true multi-role vehicle. It does the jobs of forklift, lifting equipment and work platforms on site, fully complying with the relevant European Standards.
The Roto MCSS is the most sophisticated Roto configuration, with sliding, vertical outriggers and a slewing system with continuous rotation. Cab instruments are completely digital.

Five MCSS models - 40.26, 40.30, 45.21, 50.16 and 60.24 - are based upon the same chassis, with 175HP Iveco engine and hydrostatic transmission. All models have hydropneumatic suspension and a 40 kph maximum travel speed. Four and five-section boom assemblies are used, keeping the travel length overall to a minimum, by comparison with competitive machines. 

Stabilisers
The four stabilisers are hydraulically actuated in pairs. Both the sideways extension and vertical displacement of the outriggers are independently controlled. A unique feature of the MCSS System is that the overload and stability monitoring system is completely independent of the stabiliser position.
 
This means that the Roto MCSS continues to work safely, even with stabilisers partially or asymmetrically extended, eg operating against a wall or in narrow roadways.

Continuous Slew System
A unique centre joint, designed and built in-house, transfers electrical power, digital command signals, hydraulic fluid and even cab heating water from the undercarriage up into the turret. The turret is continuously slewing, so there are no mechanical locks (except a road transport locking pin).

Lift Height
Four and even five-section booms provide lift heights of 19-30m. Chain drive mechanisms reduce parasitic weight of the boom sections and contribute to the excellent working load capacities, even at full reach.

MCSS System
The Merlin Continuous Slew Safety System (MCSS) is the secret behind the performance of the Roto MCSS. Instead of a modified 'off the shelf' crane system, Merlo have developed a uniquely capable system in-house. Each of the four outrigger legs contains a pressure transducer, which is constantly interrogated by the central processor unit (CPU). The CPU works out the stability of the Roto from those pressure measurements. It does not rely upon a preset load chart or preset attachments, like the other systems. For this reason, it does not need the outriggers to be completely extended, greatly extending the versatility of the Roto in actual use. The digital display screen gives all of the information required by the driver, whether in forklift or lifting modes. The driver is also able to preset limits for slew angle and lifting height, enabling him to concentrate on the work area. 

A very wide range of dedicated attachments is available for the Roto machines, including man platforms, crane jibs, hooks and winches.

More Info
Roto MCSS Continuous Slew telehandlers

Merlo Roto 40.26 MCSS continuous slew telehandler

  

More Info
Specifications:
Rated max load 4000kg
Max lift height 26m
Load capacity at max lift height 1500kg

Merlo Roto 40.30 MCSS continuous slew telehandler

    

More Info
Specifications:
Rated max load 4000kg
Max lift height 29.5m
Load capacity at max lift height 1500kg

Merlo Roto 45.21 MCSS continuous slew telehandler

 

More Info
Specifications:
Rated max load 4500kg
Max lift height 20.8m
Load capacity at max lift height 2500kg

Merlo Roto 50.16 MCSS continuous slew telehandler

    

More Info
Specifications:
Rated max load 5000kg
Max lift height 16.4m
Load capacity at max lift height 3000kg

Merlo Roto 60.24 MCSS continuous slew telehandler

  

More Info
Specifications:
Rated max load 6000kg
Max lift height 23.9m
Load capacity at max lift height 1500kg

Merlo High Capacity range

The Merlo high capacity range of telehandlers ensure a high-level of performance maintaining reduced dimensions. The top of the range P120.10 can lift up to 10 tons and reach operational heights of 10 meters. This range of machines have been specifically designed to enhance operational performance levels and to ensure highly effective solutions in all heavy-duty handling operations typical of sectors such as cereals, wood and concrete products. The exclusive fittings further boost its intrinsic potential, of which the most important is the Merlin (Merlo Local Interactive Network) computerised system.

Thanks to the unique technology all operating parameters are analysed by the main computer which elaborates them and ensures the highest safety at all times in order to allow the operator to concentrate on the job.

The Hydraulic system has a single variable displacement piston pump with Load-Sensing control: this system permits the regulation of the hydraulic oil flow to immediately adapt to the demands of the hydraulic services even at low engine rpm.

 

More Info
Merlo High Capacity range

Merlo Panoramic P60.10 high capacity telehandler

The P60.10 is tested to the Industrial specifications for telehandlers and has a Perkins 100hp turbo engine.

More Info
Specifications:
Rated max load 6000kg
Max lift height 9.55m
Load capacity at max lift height 3000kg

Merlo Panoramic P72.10 high capacity telehandler

The P72.10 is tested to the Industrial specifications for telehandlers and has a Perkins 100hp turbo engine.

More Info
Specifications:
Rated max load 7200kg
Max lift height 9.55m
Load capacity at max lift height 4000kg

Merlo Panoramic P120.10 high capacity telehandler

The P120.10 is tested to the Industrial specifications for telehandlers. Based upon the P120.10 HM design, the P120.10 has a Deutz 145hp engine.

More Info
Specifications:
Rated max load 12000kg
Max lift height 9.8m
Load capacity at max lift height 5000kg

Attachments

A wide range of attachments is available for Merlo telehandlers from ‘Tre Emme’, Merlo’s own dedicated attachment design and manufacturing division, including lifting equipment,
fly jib and winch, crane hooks, box winch and access equipment (such as a 3-man slewing extendable platform).

More Info

Service

Our team has the experience, the skills and the resources to keep your equipment up and running - whatever happens!

► Find out more

Credit Application

Apply for a credit account today. 

► Find out more

Locations

Our 7 depots employ nearly 150 people, including 55  
skilled service engineers.

► Find out more

Hire

We'll provide the right equipment, at the right time and at the right price, with outstanding service.

► Find out more

Locations

Our locations

Our 7 depots cover from Land’s End to Sheerness and from Beachy Head to The Welsh Valleys, employing 150 people, including nearly 55 skilled service engineers.

Find your nearest depot

Health & Safety

CBL is committed to Health & Safety in all aspects of its work including a commitment to employees, customers, suppliers and members of the public.

Health & Safety

Finance Options

We work closely with a wide range of finance providers and are able to offer very competitive rates.

Find out more

Recruitment

We are always looking for the right candidates to join our successful team, so email us at recruitment@cbl.co.uk if you would like to be considered for future vacancies.

Find out more